Buggy Super Stock Rubber Tire Class
Share
Buggy Super Stock Rubber Tire Class Rules
• CHASSIS: Any buggy based kit allowed. Associated SR10 & SR10M allowed. No purpose built dirt oval cars allowed (GFRP, Custom Works, Velocity, etc.) No offset or carbon fiber replacement chassis allowed. Battery MUST remain in stock locations from the manufacturer. Adjustable rear a-arms are NOT ALLOWED. Rear toe of the rear suspension arms must be matching on both sides.
Example - If 2° of toe-in is used on the left side, the right side toe-in must be 2° as well. NO SPLIT TOE ALLOWED
• ESC/MOTOR: Hobbywing 13.5 Justock combo kit.
• BATTERY: Any 2s (2 cell) hard pack LiPo battery, NO soft packs. Battery MUST remain in stock locations. All batteries MUST be charged in a Lipo Sack. Batteries should not exceed 8.44 volts, will be checked with volt meter. No heating pads or devices for batteries.
• TIRES: DE Racing Phenom 2.2 Tires only. Tires can be mounted on any 2.2" buggy wheel. (Clay, D30 & D40 compunds allowed). No mixing of front & rear rims. Front rims on the front, rear rims on the rear.
• BODY: Any 1/10 scale Street Stock or Late Model body. Decked bodies are allowed. Side windows may not by cut out or removed. The rear section of the body is allowed to be cut out. Maximum 2-inch spoiler height measured from the rear deck. Spoiler end caps are allowed, must not exceed DODC measurements. All four wheel wells must be cut out to appropriate scale dimensions. Bodies must resemble a Dirt Street Stock, Super Stock, or Late Model.
ONLY CERTAIN TRACTION COMPOUNDS MAY BE USED AT GO FAST RACEWAY DUE TO CHEMICAL ODOR/SMELL. PLEASE SEE GENERAL RULES SECTION!
